need replacement pin for Robo Rest.

[Lance Mirrer]

Hi,

Anyone have an extra Robo Rest Pin, or know a good replacement?

Thanks!!


Sent e-mail to company, waiting for response.

[Chris A Lawrence]

The owner of the company is active here. His name is Reed Gray aka robo hippy

[Bob Coates]

Didn't check but long allen wrench may work

[Dwight Rutherford]

The “pin” on my Robo Rest is 1/8” diameter. A hobby shop should have what you need. Perhaps Reed Gray will chime in.

[Peter Blair]

I'd just find a piece of 1/8" round stock put a little bend in it and walla!

[Reed Gray]

It is a loop T handle 6 inch hex wrench. You can probably find one at any big box hardware store or Graingers, or Fastenall. and probably cheaper than I could send you one for...

robo hippy

[Dave Fritz]

Has to be a story about why you need one. 😄

[Reed Gray]

Ummm, it has to be the shavings.....

robo hippy