roger fischer
02-01-2020, 2:07 AM
Today I show you how I made an epoxy resin sphere. It's basically trapped pine cones inside of the epoxy, formed so it has a small stand.
After it all hardened, I sanded it down to 500 grit. Afterwards i used my own sanding paste for the finish.
https://youtu.be/1oyWYSTc6jo
Hope you enjoy it
best regards
Roger
424904
After it all hardened, I sanded it down to 500 grit. Afterwards i used my own sanding paste for the finish.
https://youtu.be/1oyWYSTc6jo
Hope you enjoy it
best regards
Roger
424904