View Full Version : Spray Help Needed
Ed Gibbons
01-29-2020, 11:11 AM
I am using Enduro-Var with my Earlex. Finish is drying uneven. More of an issue on table top. Suggestions appreciated.
Thanks,
Ed
John TenEyck
01-29-2020, 4:19 PM
Uneven in what way?
John
Ed Gibbons
01-29-2020, 10:01 PM
Discovered the problem. I wasn’t putting enough product down.
Stephen Roth
02-03-2020, 12:50 PM
I spray EnduroVar a lot. I find that you have to put a wet coat down, and then pray to the chemistry gods that the thing levels out. Magically, it always does. It is kind of amazing.
I try not to spray vertical surfaces, but sometimes it can't be helped. I try to spray those as wet as I can without drips.
John TenEyck
02-03-2020, 4:35 PM
Try adding about 3% of GF's Extender to EndroVar. It will slow down the evaporation rate and give it more time to self level without having to spray heavy coats. Anyone using a turbine unit will notice an immediate improvement.
John
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.