Rudy Musclow
01-17-2020, 11:02 PM
Hello,
Highland woodworking has instructions online to make a small texturing tool much like one sold by craft supply. The link is:https://www.highlandwoodworking.com/woodworking-tips-1103mar/minitexturingtool.html. You can google diy mini texturing tool and get it that way also. Highland wood working also sells a kit with all the parts which include a 3/8 router collet, brass tube, 2- 3/8" bearing and 3/8" rare earth magnets. I bought the set of 1/8" die grinder bits and all the parts on eBay and Amazon. While waiting for the parts I turned a simple handle and drilled a 1/8" hole in the end which I inserted the die grinder bit in. I actually think it works as well as the one with bearings. Craft supply has a video of how to use the one they sell. You have to use some care so the die grinder bit does not pull out. If nothing else it was fun to make.423949423950
Highland woodworking has instructions online to make a small texturing tool much like one sold by craft supply. The link is:https://www.highlandwoodworking.com/woodworking-tips-1103mar/minitexturingtool.html. You can google diy mini texturing tool and get it that way also. Highland wood working also sells a kit with all the parts which include a 3/8 router collet, brass tube, 2- 3/8" bearing and 3/8" rare earth magnets. I bought the set of 1/8" die grinder bits and all the parts on eBay and Amazon. While waiting for the parts I turned a simple handle and drilled a 1/8" hole in the end which I inserted the die grinder bit in. I actually think it works as well as the one with bearings. Craft supply has a video of how to use the one they sell. You have to use some care so the die grinder bit does not pull out. If nothing else it was fun to make.423949423950