3/4" x 10 tpi tap for live center.

[Jonathan Bishop]

I am looking for this tap to make stuff for my Laguna live center. Anyone know the best and cheapest one to get?

Thx,

Jon

[Thomas Canfield]

Check out a standard bottom tap 3/4" x10 tpi. The bottom tap will give you a deeper thread over a standard tap with tapered start.

[Bob Coates]

HD has some search "3/4 x 10 tap"
I have also inserted/embedded pressed fit a 3/4 x 10 nut into the wood and then attached to live center.
Grizzly also has them.

[Robert Hayward]

Here is a cheapy
https://drillsandcutters.com/3-4-10-carbon-steel-bottoming-hand-tap/?gclid=EAIaIQobChMIrszI0O2B5wIVAhgMCh1b-w8hEAQYASABEgI1TvD_BwE
Here is the opposite end of the $ scale
https://www.mscdirect.com/browse/tnpla/58888736?cid=ppc-google-New+-+Threading+-+PLA_sxkalUa5M___164110844055_c_S&mkwid=sxkalUa5M|dc&pcrid=164110844055&rd=k&product_id=58888736&gclid=EAIaIQobChMIrszI0O2B5wIVAhgMCh1b-w8hEAQYBCABEgKuivD_BwE