Swing away tail stock

[Guy Mueller]

Looking for someone that sells a swing away tail stock for a Grizzly G0766

[Ricc Havens]

I don't have one of these but below the description they have a "Contact us (https://jtturningtools.com/communicate) for information about the Down N' Out for other lathe models."

https://jtturningtools.com/tailstockmanager

If you want to make one here is some inspiration I came across a few years ago when wanting one for my Jet 1642 - https://www.youtube.com/watch?v=MD7udmALf0Y

Here are plans for one for a PM3520 that maybe you can adapt for your lathe. I was going to do this for my PM3520 until I scored a closeout deal from a dealer on the actual swingaway made by Powermatic. https://app.box.com/s/yqoyk9ohbq/file/57340555493



Good luck!
Ricc