Pin nailers

[Ben Abate]

I have been reading some of the posts about pin nailers recently. I never heard of Grax. I was going to buy an Omar but, I see some of you like the Grax. I also have been seeing Cadex advertised lately, but have never heard anything about them. I suppose they are all good guns and from what I have been told by some of the fellows I have spoke to that the Omar is quite good. Do any of you have the Cadex pinner. I know I have a brad nailer and it just makes too big of a hole on small moldings.

Thank you

[Bob Marino]

Ben,

I have an Omer - made very well, but Grex is getting some good press too.

Bob

[Charlie Plesums]

I don't know those brands, but like my Porter Cable pin nailer.

The biggest warning is to not push the nailer against the work as hard as you would a regular nailer. The nose of the nailer is small so it fits in tight spaces, but you can make a big dent with the small nose.

[Paul B. Cresti]

Ben,
I switched from a Senco to an Omer and it is much nicer. No marks and the gun is nice and small. I also have Omer's brad nailer it is also very nice