Jeff C Johnson
12-16-2019, 4:11 PM
I'm a member of a makerspace (picture shared workshop where we have a woodshop, metalworking, laser cutters, 3d printers, cat surgery stations, etc.) One of our members build a nice flip cart that we can have the dewalt planer on one side and something else on the other. We don't have anything for the B side yet though.
I'm curious to ask the collective brain trust here what might be good to put on the flipside, be it a tool we may or may not have.
I was initially thinking about one of our oscillating sanders, but those get too much use, and we have a dedicated area for those (with air filters, etc).
We have a lot of extra routers, so I was considering maybe a dedicated spot to do quarter roundover bit by making a small fixed table with a melanine surface.
The surface area we have to work with is about 20"x20". I'd like to put a small jointer for small work, but no jointer worth anything would fit in that small of a space.
Any suggestions?
I'm curious to ask the collective brain trust here what might be good to put on the flipside, be it a tool we may or may not have.
I was initially thinking about one of our oscillating sanders, but those get too much use, and we have a dedicated area for those (with air filters, etc).
We have a lot of extra routers, so I was considering maybe a dedicated spot to do quarter roundover bit by making a small fixed table with a melanine surface.
The surface area we have to work with is about 20"x20". I'd like to put a small jointer for small work, but no jointer worth anything would fit in that small of a space.
Any suggestions?