2003 minimax mm16 bandsaw height

[David Scheckman]

Hi, I’m looking at a 2003 mm16 bandsaw, 12.5 “ resaw, 3.6 motor and thinking about how it will fit in and into my shop. I’m hoping someone out there can tell me the overall height dimension. I’m thinking (hoping) it may be shorter then the current version. Thanks for any help.
David

[Bruce Page]

If this helps, my 2004 with 14" resaw stands about 74" tall.

[jerry cousins]

i'm not sure of the xact year - but mine is a 1st generation saw - 7 1.5"
jerry

[Jim Becker]

If you don't get the answer before then, I"ll measure mine when I get back from traveling early next week.

[David Scheckman]

Thanks for the responses. It seems clear the 2003 model height is less then the current model, likely about by the difference in resaw capacity between the models. This will work well for me. Thanks again.
David

[Greg Parrish]

For comparison mine is a 2005 with 16” re-saw and it is just over 75” without the leveling feet bolts in it.

[Walter Plummer]

I just went and checked. Mine is a 2003. It is 70 3/8" tall. Table height is 35".

[David Scheckman]

Thanks for the info everyone.
David