Mike Racine
12-02-2019, 9:26 AM
All went together good. Only thing i have concerns with is riving knife.
Seems it loose side to side. I can push on it from the left and it moves off the blade a good 3/16. Let go and it jumps back inline with the blade
Small handle is in the locking notch but still seems loose. Is this normal or do i have a delta issue..
It will not pull out. Just side movement.
All else went good. Motor was shifted a good bit but i fixed all that.
Thoughts????
Seems it loose side to side. I can push on it from the left and it moves off the blade a good 3/16. Let go and it jumps back inline with the blade
Small handle is in the locking notch but still seems loose. Is this normal or do i have a delta issue..
It will not pull out. Just side movement.
All else went good. Motor was shifted a good bit but i fixed all that.
Thoughts????