Dueane Hicks
11-24-2019, 6:42 PM
I took a long hiatus from woodworking (20 years or so). I'm still setting up shop. I found a good deal on a older Laguna 18/47 lathe that came with lots of blanks and two chucks, a few no name chisels. Anyway, this bowl is the first thing I turned on it. It is about 6" across and made from myrtle wood.
There are some really nice blanks that are figured claro walnut, padauk, butternut, cherry, and a few I can't identify.
Once I get the "feel" back, I'll try one of those. I have found a lot of good info on this forum!
The finish is waterlox and micro crystalline wax.
Very plain, but I'm not taking chances yet!
420224
There are some really nice blanks that are figured claro walnut, padauk, butternut, cherry, and a few I can't identify.
Once I get the "feel" back, I'll try one of those. I have found a lot of good info on this forum!
The finish is waterlox and micro crystalline wax.
Very plain, but I'm not taking chances yet!
420224