ken hatch
11-10-2019, 5:48 PM
A while back I made a shave cutter sharpening jig because the Dog Bone jig from Daves' Shaves was on back order with no projected delivery date. I got it today and it is much nicer than the one I made.
Here it is with a shave cutter installed:
419336
After sharpening, a quick shave to see how it works. Couldn't be better.
419337
The jig works in the Tormek 76 jig and I expect any of the side clamping jigs. I put it in the Tormek just to see if it would work. I expect for day to day sharpening I'll use the jig to hold the cutter for working on the back and light work on the bevel using either stones or paddles.
ken
Here it is with a shave cutter installed:
419336
After sharpening, a quick shave to see how it works. Couldn't be better.
419337
The jig works in the Tormek 76 jig and I expect any of the side clamping jigs. I put it in the Tormek just to see if it would work. I expect for day to day sharpening I'll use the jig to hold the cutter for working on the back and light work on the bevel using either stones or paddles.
ken