PDA

View Full Version : bandsaw blades


John Christian
10-29-2019, 10:22 AM
favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw
Rod Sheridan
10-29-2019, 10:31 AM
favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw


Hi John, that would depend upon the radius being cut.

Without knowing that I would suggest either a 1/4" to 1/2" 6TPI blade............Regards, Rod.
John Lanciani
10-29-2019, 11:01 AM
1/4" x 6tpi Lenox Diemaster 2 bi-metal.
tom lucas
10-29-2019, 9:13 PM
1/4" x 6tpi Lenox Diemaster 2 bi-metal.

Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.
Bruce Wrenn
10-30-2019, 7:54 PM
Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.


Third vote for this blade. Contact John at Woodcraftbands for the very best service.