View Full Version : bandsaw blades
John Christian
10-29-2019, 10:22 AM
favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw
Rod Sheridan
10-29-2019, 10:31 AM
favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw
Hi John, that would depend upon the radius being cut.
Without knowing that I would suggest either a 1/4" to 1/2" 6TPI blade............Regards, Rod.
John Lanciani
10-29-2019, 11:01 AM
1/4" x 6tpi Lenox Diemaster 2 bi-metal.
tom lucas
10-29-2019, 9:13 PM
1/4" x 6tpi Lenox Diemaster 2 bi-metal.
Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.
Bruce Wrenn
10-30-2019, 7:54 PM
Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.
Third vote for this blade. Contact John at Woodcraftbands for the very best service.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.