So where did you purchase your

[Bart Leetch]

Delta splitter for your Unisaw?

Any URL or 800#

[JayStPeter]

1800-223-PART

Part#1349941

[John Keane]

From Delta. Jay's phone # and part# are solid.

[Bruce Page]

From the tooth fairy

[Russ Massery]

Amazon.com http://www.amazon.com/gp/product/B000022614/ref=nosim/002-8502141-2713642?n=228013

[Jack Norfleet]

The saw center, but they are currently out of stock.

http://www.sawcenter.com/unisawparts.htm

[Don Baer]

I didn't. It woundn't fit my Jet...:D

[Bart Leetch]

Thanks Jay, John & Jack that is the info I was looking for.

Thanks Russ but that is a Biesemeyer 78-963 T-Square Anti-Kickback Snap-In Spreader for Delta Contractors Saw. I want the Delta for a cabinet-saw because in posts that were made in the past people that had it said it would work with both thin & thick kerf.

Don I am sorry that your Jet:eek: wouldn't fit a Delta splitter.:D Nothin against your Jet I have 3 pieces of Jet equipment in my shop.

Now then lets see who is left oh yes Bruce....its easy to see your tooth fairy has funny looking teeth & a bent wing have you looked at the halo & whats holding it up, yep :eek: that right 2 horns.;)

[John A. Williams]

I bought mine at Woodcraft!
John

[Corey Hallagan]

I bought mine direct from Delta or the Dewalt Service Center as it is called now. It is made for the Contractor saw or Unisaw, the 30.00 job anyway. If you are talking about the expensive Beismeyer one, they have it at Tool King under Table Saw Assessories
http://www.toolking.com
Hope this helps,
Corey

[Bart Leetch]

John Williams

I talked to Woodcraft yesterday & they said they don't carry it.

Corey

I'll most likely purchase mine from Delta.

Thanks Everyone.

Bart

[Dale Rodabaugh]

Made mine,took all of 15 min.:eek:

[Bruce Page]

Now then lets see who is left oh yes Bruce....its easy to see your tooth fairy has funny looking teeth & a bent wing have you looked at the halo & whats holding it up, yep :eek: that right 2 horns.;)

I resemble that remark! :rolleyes:
Seriously, I bought mine straight from Delta and Jay had already given all the pertinent info. ;)