View Full Version : 2 piece electrical cord thing, where cord goes into a cabinet or box
Perry Hilbert Jr
10-03-2019, 10:15 PM
There are two piece electrical cord liners that go into a hole in a cabinet or box to hold and protect the cord. When put together they form a sort of firewall grommet around the cord. I had a box of assorted ones, but used them up or lost the ones left. I need a dozen more in 3/8 but can't remember what they are called. I tried wire grommets and only got those 2 inch hole through the desk liners or one piece firewall grommets. One of the pieces is sort of "U" shaped. The cord can be run and then the liner pieces installed after ward without removing the plug from the cord.
Thanks.
Jamie Buxton
10-03-2019, 10:19 PM
Here's a source. https://www.amazon.com/a15111200ux1295-Electric-Protection-Bushing-Grommet/dp/B01AUQGR2S
Paul F Franklin
10-04-2019, 9:16 AM
Digikey calls them strain relief bushings: https://www.digikey.com/products/en/cables-wires-management/bushings-grommets/491?k=strain%20relief%20bushing
Jim Koepke
10-05-2019, 5:46 PM
Here's a source. https://www.amazon.com/a15111200ux1295-Electric-Protection-Bushing-Grommet/dp/B01AUQGR2S
Digikey calls them strain relief bushings: https://www.digikey.com/products/en/cables-wires-management/bushings-grommets/491?k=strain%20relief%20bushing
Yep, strain reliefs. Back in the old days we just put a rubber grommet in the hole, fed the cord through, tied a knot and called it good.
jtk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.