PDA

View Full Version : mortise jig


bill walton
12-14-2005, 6:20 PM
Somewhere in the past year or so, I saw plans for a shop-built mortise jig in a magazine but I can't find it now. If anyone comes across it, please pm me or post the info here on the forum.

Thanks
Bill
Jamie Buxton
12-14-2005, 7:57 PM
Bill, there are lots of mortise jigs out there. It might help folks remember if you can describe the one you saw.
Steve Roxberg
12-14-2005, 9:13 PM
Check the web site of Pat Warner. He has directions on there.

www.patwarner.com
Bob Stroman
12-14-2005, 10:35 PM
Maybe it was FWW # 174 Tools & Shops 2004/2005 using t-track.
There's another one in FWW # 141 using drawer slides.
bill walton
12-15-2005, 6:58 AM
I think it was in the FWW174 issue. I loaned a pile to my brother in Texas so that's probably why I can't find it.

Thanks again.
Jay Knoll
12-15-2005, 7:23 AM
Hi

The April 2005 issue of Workbench had a mortising jig as well
Alex Berkovsky
12-16-2005, 7:56 AM
Bill,
There was an excellent mortising jig published in ShopNotes No. 64 (http://shop.store.yahoo.com/backissuesstore/sn064.html). I am currently smack in the middle of making one.