tim vadas
08-09-2019, 8:20 PM
I bought a couple center mount drawer slides (https://www.rockler.com/centerlinereg-lifetime-series-714-35-lb-center-mount-drawer-slides). The instructions say to separate the drawer piece from the case piece for installation and that they are just friction held together. They are quite tight and i don't want to pry in certain locations and risk bending the metal. Is there an easy way to separate these? Should i be pulling from each end horizontally, or should i try to rotate them out or pry under the ball bearings? I'm usually pretty good with mechanical things, but i can see myself bending these easily and then they won't work as smoothly.