tom coleman
07-27-2019, 5:16 PM
Do a search on u-tube for "thewoodgrafter" with a G not a C....how to make a box joint with Incra LS. Andy has published 5 videos on the LS which are more useful than anything Incra has provided. Unboxing, assembly, how to box joint, how to blind dovetail, how to thru dovetail. Checklists on how to make each joint. This is very very good stuff for someone just getting started with the LS. It looks like thru dovetails will be a big problem if you do not have a thickness planer which is necessary to obtain the perfect stock thickness
I would like to hear from some experienced LS users for suggestions on wood thickness, bit height settings etc to help neophytes get started. My Whiteside 605 set arrived today so I am about to lose my virginity.
I would like to hear from some experienced LS users for suggestions on wood thickness, bit height settings etc to help neophytes get started. My Whiteside 605 set arrived today so I am about to lose my virginity.