PDA

View Full Version : 6" Delta jointer with long table fence


Edward Gore
07-02-2019, 1:19 PM
Anyone have any ideas where i could find a replacement fence for this old relic?
Matt Day
07-02-2019, 1:21 PM
eBay or OWWM, but it might be a good excuse to upgrade.
Edward Gore
07-02-2019, 6:47 PM
eBay or OWWM, but it might be a good excuse to upgrade.

I have spiral head jointer, but my dad gave me this one and I was thinking of making this one my primary and getting a shelix head for it, etc. Ive trolled ebay, but no luck thus far.. I will check OWWM out and see if I can score some parts, thanks!
glenn bradley
07-02-2019, 6:51 PM
Model number or picture may help.
Bill Dufour
07-03-2019, 10:10 PM
Im had a 6" jointer for years then I realized most of the drawers i made were between 6-8 inches tall. Since got the 8" jointer I keep most drawers under 8" tall. that works well for most stuff in the house. Some shop drawers are taller but I have kept them under 12" which is my planer width.
Bill D
Mark Carlson
07-04-2019, 9:26 AM
Maybe you could fashion a fence out of a piece of aluminum extrusion.
Mike Kees
07-04-2019, 9:37 AM
Which fence are you looking for (pics would help ). Is it the fence that locks at the end of the infeed table ?