martyphee
12-12-2005, 12:03 PM
(http://tablelegs.com/lgimages/303-CS.jpg)It was suggested that I post over here.
I need four legs for a christmas present. Below are the details. The design below is perfect for this project. It figures that I get a call today from the company telling me their out of stock. Pretty much no chance of getting them before x-mas. Let alone finishing the project.
Has to be maple. Should be 18" tall.
http://tablelegs.com/sheratontablelegs.htm#304new
http://tablelegs.com/nimages/303-CS.jpg (http://tablelegs.com/lgimages/303-CS.jpg) Stretcher Block Coffee
This versatile leg will give your project visual interest at the floor. Use the stretcher block to support an H-stretcher, a box stretcher or even a handy shelf. Recommended top thickness is 3/4" with about a 3" overhang.
http://tablelegs.com/nimages/chckmrk.gif Available as a Table Base Kit (http://tablelegs.com/coffeekits.htm#kit303cs) Dim.: 18" H x 2 1/4", 5" upper post, 3" lower post 2 1/2" from floor
I need four legs for a christmas present. Below are the details. The design below is perfect for this project. It figures that I get a call today from the company telling me their out of stock. Pretty much no chance of getting them before x-mas. Let alone finishing the project.
Has to be maple. Should be 18" tall.
http://tablelegs.com/sheratontablelegs.htm#304new
http://tablelegs.com/nimages/303-CS.jpg (http://tablelegs.com/lgimages/303-CS.jpg) Stretcher Block Coffee
This versatile leg will give your project visual interest at the floor. Use the stretcher block to support an H-stretcher, a box stretcher or even a handy shelf. Recommended top thickness is 3/4" with about a 3" overhang.
http://tablelegs.com/nimages/chckmrk.gif Available as a Table Base Kit (http://tablelegs.com/coffeekits.htm#kit303cs) Dim.: 18" H x 2 1/4", 5" upper post, 3" lower post 2 1/2" from floor