Ian Scofield
06-18-2019, 10:15 AM
Looking to see if anyone has a go to method for applying Osmo Top Oil. I saw the FWW post here which outlined filling the grain then applying a few more coats. I’ve got a test piece that I’m working through now, following this method, but wanted to see if anyone else has their way of doing it with good results.
The stuff is very expensive so I’m trying not to waste it exploring too much with different applications and hoping to lean on someone else’s learnings.
The stuff is very expensive so I’m trying not to waste it exploring too much with different applications and hoping to lean on someone else’s learnings.