steven c newman
05-31-2019, 10:30 PM
Garage sale this morning...
410677
Hmmmm...plate is 5" x 28". Spine has a Disston etch, label screw is a Disston
410678
Handle does have "issues" may either repair the lower part of the handle, or, just replace it...
Gave the plate a bath in PBBlaster
410679
Then used an 1-1/2" wide Defiance chisel to scrape the gunk off....started to saw an etch on the plate....
Made expressly for...
GOODELL PRATT COMPANY
Toolsmiths
GREENFIELD MA USA
Toolsmith? Plate is straight as can be. Handle seems to be the only problem...except..
410680
For a small notch at the toe.....
I may have a 4 bolt handle I can switch out...
We'll see....teeth seem to be fairly sharp, nothing missing.
Stay tuned..
410677
Hmmmm...plate is 5" x 28". Spine has a Disston etch, label screw is a Disston
410678
Handle does have "issues" may either repair the lower part of the handle, or, just replace it...
Gave the plate a bath in PBBlaster
410679
Then used an 1-1/2" wide Defiance chisel to scrape the gunk off....started to saw an etch on the plate....
Made expressly for...
GOODELL PRATT COMPANY
Toolsmiths
GREENFIELD MA USA
Toolsmith? Plate is straight as can be. Handle seems to be the only problem...except..
410680
For a small notch at the toe.....
I may have a 4 bolt handle I can switch out...
We'll see....teeth seem to be fairly sharp, nothing missing.
Stay tuned..