View Full Version : Measure twice and screw it up anyway
Tom Bender
05-14-2019, 6:14 PM
Making a drawer front 41" x 3" x 1" and absent mindedly cut it 3" too short,,,,rats. The fix is surprisingly easy, I just glued the offcut back on. Endgrain gluing is surprisingly strong and invisible. I may add something to reinforce it but it really is not needed.
Sometimes I enjoy making corrections. It counteracts my incompetence with a wiff of competence.
Jim Koepke
05-14-2019, 6:52 PM
Making a drawer front 41" x 3" x 1" and absent mindedly cut it 3" too short,,,,rats. The fix is surprisingly easy, I just glued the offcut back on. Endgrain gluing is surprisingly strong and invisible. I may add something to reinforce it but it really is not needed.
Sometimes I enjoy making corrections. It counteracts my incompetence with a wiff of competence.
Measuring errors is one of my reasons for switching from using tape measures and rulers to using a story stick. No addition or marking the half inch on the wrong side of the inch.
Those of us with a touch of dyslexia can have real problems with measuring devices.
jtk
Ron Patrick
05-14-2019, 9:31 PM
Been there, done that, lol, even the fix
steven c newman
05-14-2019, 9:36 PM
Hmmm, doesn't Lee Valley sell Board Stretchers? :rolleyes:
al heitz
05-14-2019, 11:15 PM
Hmmm, doesn't Lee Valley sell Board Stretchers? :rolleyes:
Only during their April 1 "Lirpa Loof" sale day.
Lee Schierer
05-15-2019, 8:02 AM
Hmmm, doesn't Lee Valley sell Board Stretchers? :rolleyes:
I know this is the hand tool forum but sometimes a corded tool is what you need. Board stretcher (https://m.youtube.com/watch?v=bgS6-O2APWY)
Barney Markunas
05-15-2019, 8:52 AM
You are not alone.
"What's going on? I cut it twice and it is still too short."
Jim Koepke
05-15-2019, 10:29 AM
If you have a 1X12 and need a longer 1X6 it is possible to cut the 1X12 diagonally and then reorient the pieces and join them along the diagonal to make a longer piece.
There are other ways of to do this depending on how long you want to make it.
jtk
Flamone LaChaud
05-17-2019, 10:47 AM
I'll never forget the time I realized that 5'5" and 55" were not interchangable . . . .
Joel David Katz
05-17-2019, 6:06 PM
Oof. I've never done end grain gluing. I never will.
Osvaldo Cristo
05-23-2019, 9:02 AM
...
Sometimes I enjoy making corrections. It counteracts my incompetence with a wiff of competence.
You are not alone!
James Pallas
05-23-2019, 1:36 PM
Scarf joints are fairly common at all kind of lengths of scarfs.
Jim
Bob Glenn
05-24-2019, 5:38 PM
[QUOTE=Jim Koepke;2926967]Measuring errors is one of my reasons for switching from using tape measures and rulers to using a story stick. No addition or marking the half inch on the wrong side of the inch.
Those of us with a touch of dyslexia can have real problems with measuring devices.
DYSLEXICS UNTIE!
Andrew More
05-24-2019, 8:19 PM
This is a pretty good board stretcher video.
https://www.youtube.com/watch?v=rqJgZ7hq_xw
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.