Alex Zeller
05-05-2019, 12:40 PM
I recently got the G0514X2 with the geared table adjustment. Everything works fine but I noticed what looks like a threaded hole that could be used to tighten the geared rack in place after adjusting it. I don't see anything in the parts list for this though. Has anyone felt the need to do this to lock the table into position? I know it has the bolt to clamp it at the trunion but it looks like having one here would just be a benefit.
If you look to the left of the hand wheel you can see a silver piece of metal with a hole in it protruding out from the black plate. This is the hole I'm talking about.
409303
If you look to the left of the hand wheel you can see a silver piece of metal with a hole in it protruding out from the black plate. This is the hole I'm talking about.
409303