Jason Hanko
04-29-2019, 6:44 PM
Hi all,
Anyone have any experience/thoughts on the newest Oneida Super Dust Deputy Deluxe? Link here: https://www.woodcraft.com/products/oneida-air-systems-4-super-dust-deputy-deluxe?gclid=CjwKCAjwwZrmBRA7EiwA4iMzBJTJowwzrQMv3 WlxF5YK0UgBLNgOT-urzUugu7TzlOwiOryoWacjYRoCw6AQAvD_BwE
Looks like they may have listened to all the "constructive feedback" about the original not having standard/logical inlet sizes. I never did understand their decision to make a product aimed squarely at the Harbor Freight market and then size the inlets COMPLETELY WRONG to go with the sizes of duct/pipe you'd be running with that setup.
Anyways - this unit has 4" inlet and outlet which should be able to hook into a typical 1-1.5 HP setup MUCH more easily. The overall size is smaller compared to the original SDD (which probably makes sense given, again, the target market), and the bottom of the cyclone appears to be built right into the lid of the included 15 gallon dust bin. I've held off getting the original SDD and have been rocking a shop-made Thein separator because I didn't want the hassle of retrofitting the SDD into my setup. This might put me over the edge into grabbing this upgrade along with a Wynn filter.
Thoughts????
Anyone have any experience/thoughts on the newest Oneida Super Dust Deputy Deluxe? Link here: https://www.woodcraft.com/products/oneida-air-systems-4-super-dust-deputy-deluxe?gclid=CjwKCAjwwZrmBRA7EiwA4iMzBJTJowwzrQMv3 WlxF5YK0UgBLNgOT-urzUugu7TzlOwiOryoWacjYRoCw6AQAvD_BwE
Looks like they may have listened to all the "constructive feedback" about the original not having standard/logical inlet sizes. I never did understand their decision to make a product aimed squarely at the Harbor Freight market and then size the inlets COMPLETELY WRONG to go with the sizes of duct/pipe you'd be running with that setup.
Anyways - this unit has 4" inlet and outlet which should be able to hook into a typical 1-1.5 HP setup MUCH more easily. The overall size is smaller compared to the original SDD (which probably makes sense given, again, the target market), and the bottom of the cyclone appears to be built right into the lid of the included 15 gallon dust bin. I've held off getting the original SDD and have been rocking a shop-made Thein separator because I didn't want the hassle of retrofitting the SDD into my setup. This might put me over the edge into grabbing this upgrade along with a Wynn filter.
Thoughts????