Ray Newman
04-14-2019, 2:45 PM
In a recent thread "Which Miter Gauge To Choose?", Johnny Means posted: "Plus 1 on the Incra. I liked mine so much that I converted one for use on my slider."
On the FaceBook Saw Stop owners site, there was a recent thread on attaching the 1000SE and a longer Flip Stop fence to the SawStop small sliding table. The poster ordered a SawStop miter gauge bar (approximately US$30.00), then drilled and tapped it to attach the INCRA 1000SE. I am thinking 'bout doing the same. Even though I have the "new and improved" miter gauge head with detents there still is "slop" in returning the miter gauge to 90 degrees and I find that I need a hand held magnifying glass to accurately see/place the cursor and the degree markings.
On the FaceBook Saw Stop owners site, there was a recent thread on attaching the 1000SE and a longer Flip Stop fence to the SawStop small sliding table. The poster ordered a SawStop miter gauge bar (approximately US$30.00), then drilled and tapped it to attach the INCRA 1000SE. I am thinking 'bout doing the same. Even though I have the "new and improved" miter gauge head with detents there still is "slop" in returning the miter gauge to 90 degrees and I find that I need a hand held magnifying glass to accurately see/place the cursor and the degree markings.