PDA

View Full Version : Wood Gate Spring-closer



Brian Kent
04-07-2019, 11:41 PM
I have a wood gate that doesn't latch well. In addition to replacing the latch I want to get a spring-loaded closer. It is about 6' tall x 4 ' wide. Do you have experience with one that works year after year?

Bill Dufour
04-07-2019, 11:57 PM
Gravity. weight on the middle of a cable. no pulleys to stick.
Bill D.

Brian Kent
04-08-2019, 1:51 AM
Not quite sure how to do that on a swing-open gate.

Lee Schierer
04-08-2019, 9:23 AM
I've used gate closure springs like these for many years. You can use more than one if the gate is heavy. The Orange Borg carries them in their gate hardware section.
407453

Bill Dufour
04-08-2019, 9:44 AM
Not quite sure how to do that on a swing-open gate.

You add a short post a foot or more inside the gate unless you already have a tree there.

https://homeguides.sfgate.com/gravity-gate-closer-work-102879.html

Stan Calow
04-08-2019, 9:48 AM
Stanley makes self-closing gate hardware. Got it at Lowes. But my gate is heavy and it was tricky to adjust the tension. It needs regular tweaking.

Jerry Miner
04-08-2019, 5:09 PM
Or.. you can install a Kant Slam (https://hi-lift.com/products/kant-slam-gate-closer/) gate closer. Available here (https://www.hardwaresource.com/kant-slam-hydraulic-gate-closer.html) and elsewhere. Tried and true reliable (and no slamming)

407504

Derek Arita
04-08-2019, 7:03 PM
I've got this closer on a metal framed, wood gate. I works beautifully. You can adjust how fast the door closes and the open stop position. It's been working for at least 3 years in weather. https://www.amazon.com/Lockey-USA-Garden-Gate-Closer/dp/B0047PO0C8/ref=sr_1_6?keywords=gate+closer&qid=1554764203&s=gateway&sr=8-6

tom lucas
04-08-2019, 8:43 PM
I use the one's Lee suggested. They close OK but do slam a bit. The Kant-Slam looks interesting though.

Grant Wilkinson
04-09-2019, 8:33 AM
I've had these on my cedar gate over 5 winters and they are still working very well. No rust, either.

http://www.leevalley.com/us/hardware/page.aspx?p=56487&cat=3,41241,41268,56507

Wayne Cannon
04-10-2019, 11:43 AM
I have several of the coiled torsion spring style Lee mentioned on gates around here. Closing force is adjustable. They work well and adjustments hold up to weather with no problems. My gates are 2" cedar solid framed panel doors (like an exterior house door, but lighter weight), and a single closer is more than sufficient.