View Full Version : Where is the Veritas product introduction
Kevin Hampshire
04-01-2019, 12:21 PM
Did Veritas have a new product they introduced today?
Derek Cohen
04-01-2019, 12:24 PM
https://youtu.be/lQAm9OjV8iQ
Regards from Perth
Derek
Brian Hale
04-01-2019, 12:30 PM
FINALLY!!!!! A laser-guided marking gauge :D
Rob Luter
04-01-2019, 12:37 PM
I was hoping they'd finally develop a metric hammer.
Kevin Hampshire
04-01-2019, 2:05 PM
Was this new for 2019?
They come out with so many cool products that I can’t keep up with what I already bought.
That said, I’m thinking I would totally buy this. Everything except the prime gauges which I only occasionally would use ;)
Jason Martin Winnipeg
04-01-2019, 2:47 PM
That one is from 2017. I haven't seen a new one for this year yet.
Paul Sellers had a pretty good video today, though:
https://youtu.be/_X718DVttgE
Bill Carey
04-01-2019, 3:16 PM
I was hoping they'd finally develop a metric hammer.
hich of course would be solar powered
w
Brian Hale
04-01-2019, 3:59 PM
I was hoping they'd finally develop a metric hammer.
It would hang on the wall next to my metric Cresent wrench
Lee Schierer
04-01-2019, 4:54 PM
I believe Rob posted something a while back that it was just too time consuming and costly to produce a new AFD item every year, so nothing new this year. The marking gauge was a year or two back.
Matthew Hills
04-01-2019, 9:11 PM
That one is from 2017. I haven't seen a new one for this year yet.
Paul Sellers had a pretty good video today, though:
https://youtu.be/_X718DVttgE
I was waiting for him to pull out a belt sander.
Matt
Bill Houghton
04-01-2019, 9:27 PM
It would hang on the wall next to my metric Cresent wrench
Do you have a Whitworth Crescent wrench, too? Those are pretty rare.
Derek Cohen
04-02-2019, 1:53 AM
Another!
https://www.youtube.com/watch?time_continue=54&v=0Hb-EYORrgE
Regards from Perth
Derek
Hilton Ralphs
04-02-2019, 1:38 PM
It would hang on the wall next to my metric Cresent wrench
To be fair you do get metric shifting spanners (as we call them). They are marked out in mm and are sized according to maximum opening, be it 25mm or 40mm.
Mark Gibney
04-02-2019, 2:02 PM
I was waiting for him to pull out a belt sander.
Matt
Disappointed he didn't skateboard into his shop.
steven c newman
04-02-2019, 2:05 PM
I did have a Metric Adjustable wrench.....right on the handle it is stamped as a 300mm......
Brian Hale
04-02-2019, 2:15 PM
I did have a Metric Adjustable wrench.....right on the handle it is stamped as a 300mm......
If it's left-handed i'll make you a good offer for it. Mine's right-handed and i've been looking for a mate for it
steven c newman
04-02-2019, 4:06 PM
Photos?
407040
All depends on your point of view...
407041
Left hand, or right hand?
Now,...where is that box of holes I sent the rookie after...:rolleyes:
Brian Hale
04-02-2019, 4:43 PM
The box of holes is always in the sub-basement next to the board stretcher
Get the key from the receptionist.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.