View Full Version : How to sharpen this beading gouge?
Michael Costa
03-18-2019, 4:05 PM
405935
It's a Sorby 1/4"
Kyle Iwamoto
03-18-2019, 4:52 PM
"Sharpen" the top flat of the tool. Don't touch the round part or you'll change the dimensions and or shape of the tool..... DAMHIKT
Michael Costa
03-18-2019, 5:18 PM
"Sharpen" the top flat of the tool. Don't touch the round part or you'll change the dimensions and or shape of the tool..... DAMHIKT
That's a good idea. Would you run a diamond home across the entire top or just the end of it? Also, what is DAMHIKT?
Ken Fitzgerald
03-18-2019, 5:36 PM
Michael, I have one similar and I diamond hone the flat places adjacent to the oval area. I push the hone towards the oval.
lynn cranmer
03-18-2019, 5:40 PM
DAMHIKI Don't ask me how I know that.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.