dennis thompson
02-25-2019, 4:22 PM
I have been hanging window blinds for my houses for 50 years. It was always:
- hold the bracket to where you are going to hang it
-put a pencil mark where the screws will go
-drill the holes
-try to hold the bracket, start the screw, hold the screwdriver and screw the screw in (easy if you have 3 hands)
-do it again for the second and in some cases the third bracket and hope all three brackets are in the right place.
Yesterday I realized a much easier way, simply put two sided tape on the back of the brackets, put them all in place, drill ,screw and you're done and only two hands are required.
I now don't hate hanging blinds quite as much as I used to.:)
Just wish it hadn't taken me 50 years to figure this out.
- hold the bracket to where you are going to hang it
-put a pencil mark where the screws will go
-drill the holes
-try to hold the bracket, start the screw, hold the screwdriver and screw the screw in (easy if you have 3 hands)
-do it again for the second and in some cases the third bracket and hope all three brackets are in the right place.
Yesterday I realized a much easier way, simply put two sided tape on the back of the brackets, put them all in place, drill ,screw and you're done and only two hands are required.
I now don't hate hanging blinds quite as much as I used to.:)
Just wish it hadn't taken me 50 years to figure this out.