Markers for pet graves?

[Ken Platt]

Folks -

I was looking to see if anyone had had any experience with ordering stone markers for pet's burial sites. I've wanted to get something with their names for the 5 dogs we've buried over the years on our property here, and today we had to let our beloved Wally go, so I thought maybe it was time for me to actually get something. Wally had degenerative mitral valve disease. We fought it with multiple medications over the past 11 months, and after doing really well for 8 months or so, he developed atrial fibrillation from the enlarged heart, and then things slowly got worse with him not eating ( the meds ruin a dog's appetite) , was unable to drink because it refluxed right back from his esophagus being partly blocked, and in the past few days he got to where he couldn't do much anymore. Our vet who'd been taking care of him all this time came to our house, and it was as peaceful and gentle as such a thing can be. I made a pine box for a casket, and we buried him near our other dogs on a nice sunny slope facing our house.

Anyhow, I'm not looking for anything huge, just small stone markers with their names. I have a vague picture in my mind of something with a triangular cross section so it could sit by itself with the name facing up at an angle, with maybe 3-4 inch high letters. I had a quick look online and was rapidly overwhelmed. Anyone got some experience to share?

Thanks - Ken

[Rod Sheridan]

402097Ken, I am very sorry to hear of the loss of Wally.

I recently lost my shop supervisor Ellington.

The vet had a paw print cast made for us.....Regards, Rod

[Frederick Skelly]

Ken,
Im very sorry for your loss. It astonishes me how attached we (I) can get to a dog. They are such truly amazing friends.

I lost a good friend of my own last year. I placed this marker above his grave because it looks so much like him. LINK (https://www.amazon.com/Design-Toscano-Memorial-Tribute-Polyresin/dp/B00507T8BU/ref=sr_1_3?ie=UTF8&qid=1548540819&sr=8-3&keywords=Design+toscano+dog+memorial+angel) It doesnt have his name on it, but it might complement whatever you decide upon. The company, Design Toscano, sells many pet memorials, some of which are on Amazon.

Fred

[Jerome Stanek]

check into the engravers section someone there may be able to make a custom one for you. I am not able to do much as my shoulder is still sore from rotator cuff surgery but I made a couple monuments for people that I know. I used corian that will last for years

[Steve Jenkins]

I used a sandstone flagstone and a dremel tool to carve their names

[Bill Dufour]

marble tile or countertop scraps and a sandblaster with rubber stencils cut from yoga mat.
Bill D.

[Bruce Page]

Ken, I am sorry to hear about Wally. Our pets become such a big part of our lives that loosing them can be very painful. I lost my best friend a little over a year ago. I still think about her every day.

[Ken Platt]

Rod, I had seen your post and loved your description of Ellington as the shop supervisor. I am sorry for your loss.

I'm not sure how I would describe Wally's position here, but certainly something along the lines of monarch might convey it. Our vet also made a paw cast. I will pick it up in a couple of days and put it on my desk where I can see and touch it often.

Ken

Ken

[Ken Platt]

Steve, that's an interesting idea. Couple questions: How long did that take, roughly? And how many dremel bits? Also, freehand or with some sort of pattern? I can't draw a straight line, freehand. Where does one get a sandstone flagstone?

Could you post a picture?

Ken

[Keith Outten]

Some options:

Corian can be either laser engraved or CNC routed. Laser engraving a photograph is possible provided the photo has the appropriate contrast and deep engraved text can be paint or epoxy filled as well. Corian will last up to 50 years in an exterior service according to Dupont. VCarved text and graphics are very easy to do in Corian with a CNC router and can also be either painted, filled with epoxy or sprayed with a bronze or other metallic coating. Additionally a CNC inlay can be created in Corian the same way you might create one in wood. An inlay relies on an adhesive to keep the letters intact and the lifespan of adhesive is probably not suitable but there is a technique that the letters drop in from the back and they have a mechanical fit that would last the life of the marker.

Black marble tiles can be laser engraved with photographs and text. The image contrast will most likely fade over many years so this technique may not be the best choice. Deep engraving can be paint filled and refreshed every few years to keep the marker looking nice. Marble and a number of soft stones can be CNC routed, basically this is the next best option to a concrete marker but stone will often chip when machining small details.

Brass and other soft metals can be CNC routed, either VCarved or with raised letters.

IMO a Corian CNC raised text marker is the best choice for longevity and cost. Fifty years of exterior service without any maintenance is a good option.

[Thalia Daniels]

Condolence Rod.

[Ken Platt]

Keith, thanks for the ideas. How do I find someone who does this? I tried some searches without any success, but might be using the wrong search terms - I tried corian raised text marker. Regards,

Ken

[Perry Hilbert Jr]

Lost my best ever companion in a house fire 4 years ago. He is buried up under the tree where he spent so much time surveying his realm. He was getting old and I knew his last visit to the vet was not far off. Still hurts to think about the fact that I did not get to say good bye. OTH, I never saw him fade into such old age that he became debilitated. My only memories are of him healthy and vibrant. Roaming the hay field chasing butter flies on a warm Spring day. Riding shotgun in the truck, etc. We have had a steady string of dogs here on the farm. Loved them all. All were family not just animals. Duke was the best. I sometimes wonder what our eventual reunion will be like, but in the meantime, there is another who has become part of the family. Different personality, but still far better than many people I have met.

[Keith Outten]

Ken,

You can find plenty of people right here in both our CNC Router and Laser Engraving forums that can produce these types of jobs.

[Keith Outten]

Here is a few more just to give you some ideas. Most of these are in my Corian sign Gallery (https://sawmillcreek.org/album.php?albumid=719)

You should start a new thread in our Classifieds Forum and ask about monument markers. There are lots of talented people here whose work makes mine look pretty shabby.

[lowell holmes]

We have buried three dogs, and our current canine is a ten year old 70 pound black lab named Madison.
We walk most mornings 3/8 to 3/4 of a mile. It two old dogs healthy and pain free.

A side light, I had heart attack about 14 years ago, and I have no lingering issues. I read a book on fitness walking.

https://www.google.com/search?q=fitness+walking+lesson+plans&oq=fittness+walking&aqs=chrome.5.69i57j0l5.12383j0j8&sourceid=chrome&ie=UTF-8

[Marc Jeske]

How about maybe a local small scale Monument shop that makes Tombstones ?

They may have scrap to use for the stone, and basic lettering maybe not too expensive ?

Marc

[Marc Jeske]

If not far, I would pay a visit rather than phone call to someone wearing a Suit reading off a price list.

Marc

http://dagatagranite.com/memorials/pet-markers/

http://daleyconnerton.com/ct-funeral-headstones-granby.html

[Marc Jeske]

https://www.theheadstoneguys.com/PriceList.aspx

[Marc Jeske]

Ideas for you if you have a sandblaster - Marc

https://www.youtube.com/watch?v=NkxVFmrOP4k


https://www.youtube.com/watch?v=2Ie4Zi1QRUc


https://www.youtube.com/watch?v=uQNo2oXBQjI