Jared Porter
01-25-2019, 10:51 AM
I have a Walker Turner 14" MBN935, 9BS6390 that I'm trying to get in working order.
The blade tension spring is 1"OD, .64"ID, wire diameter .174", length 1.4". I think the Walker Turner part # is BN22 or 310-1. I don't have any way of knowing how long the spring should be, how much it has compressed over the years.
I'm assuming the spring is shot because of the age and the likelihood that it was left tensioned. Anyone here with this saw or similar who knows what dimensions a good spring should have? I'm also looking for resources for replacements. I checked McMaster Carr but I didn't see anything that seemed close, plus I wasn't entirely sure what I was looking for.
Thanks in advance for any help.
The blade tension spring is 1"OD, .64"ID, wire diameter .174", length 1.4". I think the Walker Turner part # is BN22 or 310-1. I don't have any way of knowing how long the spring should be, how much it has compressed over the years.
I'm assuming the spring is shot because of the age and the likelihood that it was left tensioned. Anyone here with this saw or similar who knows what dimensions a good spring should have? I'm also looking for resources for replacements. I checked McMaster Carr but I didn't see anything that seemed close, plus I wasn't entirely sure what I was looking for.
Thanks in advance for any help.