Mike OMelia
01-22-2019, 7:01 PM
So, in my guitar work, I do some veneering on something called an arm wrest bevel. More importantly, I use a process for purfling layup that involves "ironing" it in place. I use a standard household iron to do this. I apply tite bond to both surfaces, let it dry, then iron it in place. I'd like to use something smaller. Here is something that meets my requirements. Wood River offered one, but no more. Is this a good tool?
https://www.tools4flooring.com/trimmers-edgebanding-glue-applicators/gundlach-1-eb-edgebanding-iron.html?gclid=EAIaIQobChMIorWOisuC4AIVxbXACh36jg k7EAQYASABEgLDY_D_BwE
I def need that sharp nose.
Mike
https://www.tools4flooring.com/trimmers-edgebanding-glue-applicators/gundlach-1-eb-edgebanding-iron.html?gclid=EAIaIQobChMIorWOisuC4AIVxbXACh36jg k7EAQYASABEgLDY_D_BwE
I def need that sharp nose.
Mike