Richard McComas
01-20-2019, 3:31 PM
I have to make some curve cuts in cherry wood from 4-6 inches thick. Due to the radius of some of the curves Ill need to use 1/4 wide blade. My research so far tells I should probably use 6 PPI. What I don't know is which tooth configuration to use. Standard, skip tooth, variable, or hook.
If you go to the 7:00 mark in this video you can see exactly what I'm trying to accomplish. Band sawing out some drawer fronts for a Block Front Chest
https://youtu.be/0GdrRoXAcMU
If you go to the 7:00 mark in this video you can see exactly what I'm trying to accomplish. Band sawing out some drawer fronts for a Block Front Chest
https://youtu.be/0GdrRoXAcMU