bending plywood resource

[Eric John]

Afternoon,
Im trying to locate bendable plywood, I'd like to get 1/8" thick.
cant seem to find it, anyone know? I have small hope of local.
im treasure coast fla., anyone have a source that will ship?
Regards
Eric

[Mel Fulks]

Try calling it "Italian Bending Ply". 4 by 8 for column type project ,8 by 4 to do barrel type projects

[John TenEyck]

You should be able to order 1/8" Italian poplar bending plywood through your local full service lumber yard. If not try a local cabinet shop to see if you can get it through them.

John

[Joe Hendershott]

boulterplywood.com

[Michael Costa]

I know woodworkers source in Phoenix has bending plywood. I dont know what it costs and worse, what the shipping would be. The website sucks as far as what they have and dont have. I just looked and didnt see bending plywood on the site but was just there and know they have it. Best to call them.

https://www.woodworkerssource.com/

[Mel Fulks]

I would be specific in inquiry. There is a material about 3/8ths thick made of luan, ok for some purposes but seldom
interchangeable with Italian bending ply. The luan is often used under plastic laminate, it's pretty coarse and open grained.