Andy Emerson
01-14-2019, 12:55 PM
I have a Kingston-Conley motor on a Craftsman drill press, model 113.24590. The start capacitor appears to be bad.
The specs on the motor are:
Frame 11-8 C H.P. 1/2
Type K.B Cycles 60
Volts 110/220 Phase 1
Rpm 1725 amps 8/4
Serial # 70h1009692
I can't read all the numbers off the bad capicitor, it's scratched off.
Is this enough info to get a replacement capcitor. There is no mention in the user manual. Any ideas would be appreciated.
The specs on the motor are:
Frame 11-8 C H.P. 1/2
Type K.B Cycles 60
Volts 110/220 Phase 1
Rpm 1725 amps 8/4
Serial # 70h1009692
I can't read all the numbers off the bad capicitor, it's scratched off.
Is this enough info to get a replacement capcitor. There is no mention in the user manual. Any ideas would be appreciated.