View Full Version : Another Festool RO90 question
Robert G. Parker
01-08-2019, 3:07 PM
I just acquired a RO90 and was wondering if Festool makes(or if it's needed) a Protection NET
for the Rotex series?
Bryan Lisowski
01-08-2019, 5:22 PM
What is a Protection NET? I have used all of my Festool sanders including the RO90 right out the systainer for years with no issue.
Van Huskey
01-08-2019, 6:04 PM
Are you talking about the edge protector for the circular pad? If so it should have come with one. The part number is 497936. They also make a 3 piece "window protector set" with different offsets. https://www.bobmarinosbesttools.com/product.asp?pn=497936
If you are talking about Granat NET abrasives I don't think they make them in the round or Delta for the RO90.
Robert G. Parker
01-09-2019, 8:45 AM
Yep, I'm asking about the Granat NET pad protectors. I have one for my RTS400 as recommended by FT to protect the
hook and loop pad from heat generated by the sanding action. I would assume that the RO90 generates a lot more
heat than a RTS400, especially in rotex mode, so it would seem like a pad protector would be offered. Then again
maybe they just want to sell more pads. Oh well, I did drink the green coolaid.
Dave Sabo
01-09-2019, 10:11 PM
Van is correct , Festool doesn’t make net abrasives for the ro90.
Robert is correct that the ro90 generates more heat than the rts400, but the point is kinda moot given above.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.