PDA

View Full Version : Yankee Drill



lowell holmes
01-08-2019, 2:17 PM
I was just in the shop and saw my Yankee Drill. I suspect some of you younger guys don't know about them.

https://www.garrettwade.com/garrett-wade-yankee-push-drill-gp.html?SCID=W4011000&gclid=Cj0KCQiAsdHhBRCwARIsAAhRhskkNSuN2dX2qg1eSONd YvVOYM1U74iVjcQhJP9SEpAknC1AZRsNOLcaAlf0EALw_wcB

I have an antique with all if the bits. I don't use it much anymore, but will.

Jim Koepke
01-08-2019, 2:59 PM
I was just in the shop and saw my Yankee Drill. I suspect some of you younger guys don't know about them.

https://www.garrettwade.com/garrett-wade-yankee-push-drill-gp.html?SCID=W4011000&gclid=Cj0KCQiAsdHhBRCwARIsAAhRhskkNSuN2dX2qg1eSONd YvVOYM1U74iVjcQhJP9SEpAknC1AZRsNOLcaAlf0EALw_wcB

I have an antique with all if the bits. I don't use it much anymore, but will.

During my days as a telephone installer mine was used all the time. Now they mostly sit in a drawer:

400702

The weak point is the threads at the base of the handle. A lot of telephone workers were in the habit of pushing up on the nut to close the cup. Eventually this wore out the threads and the cup wouldn't close.

The older design with the spinning cap was good. My recollection is this one had a difficult to operate bit release that could have the user ending up with a hole in the palm of their hand.

jtk

James Pallas
01-08-2019, 3:51 PM
Use mine often. Elbow battery never needs charging.
Jim

lowell holmes
01-08-2019, 4:11 PM
Mine sit mostly on my bench to be admired. They do see occasional use.

Frederick Skelly
01-08-2019, 4:27 PM
I have and use exactly the one you linked to Lowell!

Bill Houghton
01-08-2019, 4:31 PM
Unbeatable for installing small hardware around the house - blinds and the like. Fit in the back pocket of the jeans, fast and efficient.

William Adams
01-08-2019, 5:00 PM
I bought a German-made Schroeder drill/screwdriver at the local Sears a while back, and it managed to make its way into a frequently used tool roll.

steven c newman
01-08-2019, 5:12 PM
Have 2 of the North Brothers made ones..and a couple by Millers Falls....small pilot holes seem to be the best job for mine..
400725
I keep them set up by the size tips I need the most...Black handled one is almost worn out,,,

Tony Wilkins
01-08-2019, 5:43 PM
Use mine often. Elbow battery never needs charging.
Jim
You must not have my elbows!