Terminus knife replacement - where to buy

[Phillip Mitchell]

Looking to buy some replacement knives for my new-to-me 12" Oliver 166 with a Terminus head. Attached is a photo of the cutterhead. In case you can't read it - 125 x 305 Z3 20*

I'm assuming the "305" indicated 305 mm in length, which is what appears to be in there currently.

I've been on the Carbide Processors site and a few others, but can't find 305mm length. Can I use 310mm instead (don't see why not, but figured I'd ask) ?

Anything else I should know? Preferred vendor for Terminus knives?

Thanks!

[Darcy Warner]

Try global tooling

[Phillip Mitchell]

Thanks Darcy.

I looked on their site previously and they definitely sell Terminus. I’m not seeing 305mm length anywhere I look, but maybe I’m barking up the wrong tree and just need to get 300mm or 310mm if they’ll fit in the cutterhead properly.

[Darcy Warner]

Make a phone call to them. I never order knives or tooling without talking to someone.

[Bill Zickel]

http://www.h3dtool.com/

[Bob Magnuson]

Why not contact Terminus directly?

[Bill Zickel]

Why not contact Terminus directly?

I believe H3D Tool bought Terminus a couple years ago.

http://www.h3dtool.com/?nav=newsDetail&news=29

[Phillip Mitchell]

I called H3D Tool today and yes, they have acquired Terminus. A 5 minute phone call got me exactly what I needed (hopefully) with next day shipping. Don't know why I didn't do this first. Thanks guys.