John Sayen
12-30-2018, 12:49 PM
Hi all
I spent the morning scrubbing my a3-31 tables with a random orbital and scotch brite pad + simple green, and then cleaned them with mineral spirits when done.
This was the first time since receiving (originally just wiped the grease off) from the factory and I’m much happier with their glide now.
Afterwards I noticed that the left table has a noticeable amount of more friction than the right. This remains true after applying glide coat. It is much better than pre deep cleaning session.
Is this by design? Or is it luck of the draw or am I missing something all together?
Regardless I am much happier with the machines performance now.
Thank you.
I spent the morning scrubbing my a3-31 tables with a random orbital and scotch brite pad + simple green, and then cleaned them with mineral spirits when done.
This was the first time since receiving (originally just wiped the grease off) from the factory and I’m much happier with their glide now.
Afterwards I noticed that the left table has a noticeable amount of more friction than the right. This remains true after applying glide coat. It is much better than pre deep cleaning session.
Is this by design? Or is it luck of the draw or am I missing something all together?
Regardless I am much happier with the machines performance now.
Thank you.