Patrick Irish
12-29-2018, 1:55 PM
399812Hey guys, any idea the value of these and if they’re worth getting? I know that’s subjective based on need. I just made a knife handle for a Christmas present and having a belt sander would have been nice. It’s a 1x42 belt. I used my ridgid spindle sander and lots of hand sanding. The belsaw could also be used to sharpen tools with the proper jig angle setup.
I can get one for $100 but that seemed high. I offered $60 and seller said no. It is only a 1/3hp motor so if I did get it I’d want to upgrade to a 3/4hp or more eventually. www.vintagemachinery.org/photoindex/images/18665-A.jpg
I can get one for $100 but that seemed high. I offered $60 and seller said no. It is only a 1/3hp motor so if I did get it I’d want to upgrade to a 3/4hp or more eventually. www.vintagemachinery.org/photoindex/images/18665-A.jpg