100 watt laser

[stan kern]

I started losing power, settings were not the same , so I ordered a new 100watt tube 100,000 hr type turn ou the shipped a 110 watt
jut as was going to install I noticed my power supply was arcing, so I replaced it.
Turned out that all that was wrong
Now I'm stuck with a 110 watt new tube

[Michael Henriksen]

That is the peak power it will fire at. Mine is about the same. In daily use you should not push it above 32 mA.

[Jerome Stanek]

My Reci 130 watt says to max should be 25 ma