Grizzly G0506X3 Bandsaw

[Bill Rhodus]

I have just purchased a Grizzly G0506X3 18" commercial bandsaw with 3 hp motor that I intend to use primarily in a straight line/ripping operation. I got this machine inexpensively for the size machine and all of the primary components appear to be in useable condition and I will be evaluating its performance/capability to determine whether I want to refresh/restore it. Is anyone familiar with this machine? Will it properly tension a 1" band for ripping? Would you invest $1500 in this saw for initial purchase and restoration?

[Van Huskey]

Would you invest $1500 in this saw for initial purchase and restoration?

Not when the current 514x 3hp 19" saw can be had new with a warranty for ~$250 more shipped to my door.

[Bill Rhodus]

Thank you Van; I should have referenced new cost before posting. This will affect the amount I am willing to spend on this saw but it appears not to be as great an issue now. The seller of this saw, an architectural components manufacturer,had advertised it as a parts saw. When I picked the saw up yesterday, I was surprised at the condition; this saw was in operable condition and the cosmetics were good. The manager had expressed a desire to get this saw out of their way and it is obvious they were just getting rid of it and selling cheap to ensure no issues from the buyer. I am going to replace the tires and guide bearings and install a VFD and put the saw to work. The coming days will tell me whether this saw is a good performer or a candidate for resale. I hope to find a saw in this size range that is a good performer and will allow me to replace a 22" saw I have had for some time to free up some shop space. The bigger saw has a larger footprint and a 8' infeed and outfeed rollcase that dominates one side of my shop. I am no longer interested in resawing large items and only need to break down manageable sized lumber into furniture sized components. Hopefully the Grizzly will fit the bill.

[Bill Space]

Your original post seemed like (to me anyway) you were paying $1,500 for the saw and then going to restore it.

Your second post seems to indicate you got the saw for (much?) less than that amount, and the $1,500 is what you might have in the saw after you complete your work on it... Still, I think Van hit the nail on the head. :)

Bill

[Van Huskey]

Honestly, I think you will be happy with the saw. It is a solid saw and good to know you are getting out cheaper than expected.

[Bill Rhodus]

Yes Bill; I could have been much clearer. I paid $400 and was wondering how much I could spend on it before I was in too deep. After ordering parts today I expect this saw to be in operation for less than a total outlay of $800.