View Full Version : Quadracut Freud raised panel bit
Ron Citerone
11-27-2018, 9:43 PM
I just bought the 3 1/2" Shake style Freud raised panel router bit and made two raised panels today out of walnut. I was really impressed with the smooth finish cut and how easily it was to feed the stock. Well worth the investment IMHO. Thought I would share info for those considering getting one.
Ron
Van Huskey
11-27-2018, 10:07 PM
The only time I don't buy Whiteside bits is if Freud makes a Quadracut in the same profile.
Ron Citerone
11-27-2018, 10:24 PM
The only time I don't buy Whiteside bits is if Freud makes a Quadracut in the same profile.
I have just started buying Whiteside and considered it this time, but the reviews for the Quadracut were so good I decided to try one. Very glad I did.
Ed Labadie
11-27-2018, 11:19 PM
The quadracut bits are hard to beat...
Ed
Reggie Lamothe
11-28-2018, 9:50 AM
have the same set up I'm a big fan
Cary Falk
11-28-2018, 9:57 AM
I bought several quadracut bits when Home Depot was clearing them out a couple of years ago. They are my favorite bits
Frederick Skelly
11-28-2018, 5:46 PM
The quadracut bits are hard to beat...
Ed
They sure are!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.