Contact cement

[Adam Augustine]

I have to use a lacquer base contact for laminate a job. I will not be able to spray. I'm using Star Stuk NS-35+, a brushing grade product. It says on the can that you can roll it on. I was wondering what kind of roller would be best? This product is very thick.

[Steve Jenkins]

For rolling I always use an “adhesive roller” from Home Depot. Allows a nice even spread as you need to beware of puddles.

[johnny means]

We call them corncobs. Clean them off real good or die them in lacquer thinner and they can last years or at least through the entire job.

[johnny means]

Easiest way to apply is to use a squirt bottle to apply the contact adhesive then roll it out. Adhesive in paint trays will get gummy real quick.

[Van Huskey]

We call them corncobs. Clean them off real good or die them in lacquer thinner and they can last years or at least through the entire job.

I assume you mean these

395757

To google use contact adhesive roller.


BTW great tip on the squirt bottle to dispense it!

[Steve Jenkins]

Looks like it to me