View Full Version : Contact cement
Adam Augustine
10-30-2018, 9:49 AM
I have to use a lacquer base contact for laminate a job. I will not be able to spray. I'm using Star Stuk NS-35+, a brushing grade product. It says on the can that you can roll it on. I was wondering what kind of roller would be best? This product is very thick.
Steve Jenkins
10-30-2018, 10:01 AM
For rolling I always use an “adhesive roller” from Home Depot. Allows a nice even spread as you need to beware of puddles.
johnny means
10-30-2018, 3:18 PM
We call them corncobs. Clean them off real good or die them in lacquer thinner and they can last years or at least through the entire job.
johnny means
10-30-2018, 3:21 PM
Easiest way to apply is to use a squirt bottle to apply the contact adhesive then roll it out. Adhesive in paint trays will get gummy real quick.
Van Huskey
10-30-2018, 6:10 PM
We call them corncobs. Clean them off real good or die them in lacquer thinner and they can last years or at least through the entire job.
I assume you mean these
395757
To google use contact adhesive roller.
BTW great tip on the squirt bottle to dispense it!
Steve Jenkins
10-30-2018, 6:48 PM
Looks like it to me
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.