2450 walker turner table saw

[louie larue]

hi folks, louie here first time and just starting to put a shop together and learn. so i'm wondering why i can't find any info on this saw

[John C Bush]

try the OWWM website. Lots of knowledgeble enthusiast there.

[Jim Becker]

Louie, welcome to SMC!

John is correct..."old iron" is somewhat of a specialty thing while some pieces do get discussed here, the OWWM site is the go-to for a lot of things. Nature of the beast.

[louie larue]

thanks guys

[Dave Cav]

Also vintagemachinery dot org, a related but different site. OWWM is a forum site like Sawmill Creek; Vintagemachinery is more of a wiki or data base.

[Patrick Perry]

There is a guy on Ebay who reproduces (not just a photocopy but a "cleaned" up original) Walker Turner manuals, I bought one a week ago for my shaper. There is one listed for your tablesaw in case you can't find it elsewhere.

[Bill Dufour]

WT was bought out by Delta about 1952 and they quickly stopped making saws. So no surprise that a small saw maker that has been gone for 60 years has little info available today.
Bill D