Marius Nel
10-16-2018, 12:45 AM
I've been trying to engrave plexiglass using the setting recommend by the machine supplier and also others downloaded from various sites. However I've not been able to replicate the same result that they have shown in testing prior to me purchasing the machine. I only achieve a grey versus white marking on black and no marking/burning on coloured Plexiglas. I've created a few different map/matrix with various power/frequency/q pulse width to test with but either no result or burned plastic as result.
Is there anyone who could suggest a more productive method to test various settings on a substrate or even willing to share settings that they have been using that works on the Plexiglas? Also any suggestions on how to 'replicate' non-mopa settings on a MOPA machine? For example using a fixed Q pulse width to simulate a non-mopa machine? And what would that be?
Thank you
Is there anyone who could suggest a more productive method to test various settings on a substrate or even willing to share settings that they have been using that works on the Plexiglas? Also any suggestions on how to 'replicate' non-mopa settings on a MOPA machine? For example using a fixed Q pulse width to simulate a non-mopa machine? And what would that be?
Thank you