PDA

View Full Version : Simple, easy flip stop



Robert Engel
10-01-2018, 1:08 PM
Not that apparent in pics but I used a T slot router bit and toilet bolts.

I put one on each side of the radial and miter saws.

394269

394268

394270

Bill Berklich
10-01-2018, 1:46 PM
Nice! I need to do that too.

Frederick Skelly
10-01-2018, 8:36 PM
Ive got one that's similar, but yours is much nicer!
Thanks for posting.
Fred

glenn bradley
10-01-2018, 11:35 PM
Very nice tip.

dan petroski
10-03-2018, 10:30 AM
Good idea. Thanks .......Dan

James Combs
11-27-2018, 9:57 PM
Great idea, wish I had seen it a couple years back. I went to the trouble of building a Biesmeyer clone when I could have gotten by with this. If something ever happens to mine I see what I will be going to. ;-)

Kris Cook
12-06-2018, 9:39 PM
Thanks Robert for the tip. I will put to use.

Ted Reischl
12-11-2018, 11:35 AM
Nice job!

Just a suggestion. . . make a couple more and put them on your fences. I use something similar and I found that having two is really useful. I can leave one set to a dimension I may need to come back to and use the other one so I do not lose the setting. Not sure that is real clear! LOL.

Hilton Ralphs
12-12-2018, 1:58 AM
Good stuff Robert. Next time you're ordering from Lee Valley, put this (http://www.leevalley.com/us/Hardware/page.aspx?p=40067&cat=3,41241)in your cart as it will allow the stop to sit horizontal (flip 270 degrees) to the work surface (out the way).

398538

Robert Engel
12-12-2018, 10:55 AM
Ted, yes I have one on each side.

Hilton, as you can see, they flip out of the way.

Simon MacGowen
12-12-2018, 12:32 PM
I think Hilton is saying you can flip the stop over to the other side of the fence with his suggested hinge. Your photo shows the stop is standing up on the fence.

One question: the last photo shows the rod of the hinge slightly undersized. Is there any little play in the hinge (sideways, or inside the barrel)?

I don't like flimsy hinges used as precision stops.

Simon